- Lecture 1
- Definition of Medical Gas System.
- Types of Medical Gas System.
- Applicable Codes and Standards.
- Types of Medical Gas Required ( Definition & source of supply )
1- Oxygen (O2)
2- Medical Air (MA)
3- Medical Vacuum (MV)
4- Nitrous Oxide (N2O)
5- Nitrogen (N2)
6- Surgical Air (SA)
7- Carbon Dioxide (CO2)
8- Anaesthetic Gas Scavenging System (AGSS)
9- Entonox (N2O/O2)
10-Heliox (HE/O2)
- Lecture 2
- Medical Gas System Components
1- Medical Gas Outlets (Terminals)
2- Medical Gas Pipes
3- Area Valve Service Unit (AVSU)
4- Medical Gas Cylinders and Manifold
5- Medical Gas Equipment’s
- Estimating flow requirements.
1- Departments, Room types and Number of outlets
2- Provision of terminal units, AVSUs and local alarms
3- Case Study
- Lecture 3
- Estimating flow requirements.
1- Flow rate per outlet (depends on the specific gas and outlet type).
2- Diversity factor (depends on the number and type of outlets).
3- Case Study.
- Medical Gas System Pressure
1- Pressures required for 4 bar gas system
2- Pressures required for Vacuum Pressure gas system
3- Pressures required for 7bar gas system
4- Case Study
- Selecting Equipment.
1- Choosing an Oxygen Supply System.
- Lecture 4
- Selecting Equipment.
- Choosing an Oxygen Supply System (Primary, Secondary & Third sources).
- Choosing Medical compressed air systems (Primary, Secondary & Third sources).
- Choosing Surgical Air Systems (Primary, Secondary & Third sources).
- Choosing Medical Vacuum Systems.
- Choosing Anaesthetic Gas Scavenging Disposal Systems.
- Choosing Nitrous Systems (Primary, Secondary & Third sources).
- Case Study
- Lecture 5
- Selecting Equipment.
1-Dental Air system
2- Dental Vacuum system
3- Nitrous Oxide/Oxygen Mixtures (ENTONOX (N2O/O2))
4- Helium/oxygen mixture (HE/O2)
5- Case Study
- Lecture 6
- Pressure Drop Calculation Concept For All Types Of Medical Gas Pipes.
- Medical Gas Pipes Size.
- Area Valve Service Units (AVSUs) .
- Labeling and Material
- Complete Medical Gas System Project Design